VMware vSphere 4 Podręcznik Użytkownika Pobierz pdf (Strona 64)

Technical white paper | HP Enterprise Virtual Array Storage and VMware vSphere 4.x and 5.x configuration best practices

Component

Description

VM2 (Windows Server 2008 VM)

HBA3

Port 1: 1000-0000-C97E-CA72

Port 2: 1000-0000-C97E-CA73

Vdisks

\VM-DirectLUNs\Win2k8-VM-dLUN1: 30GB

\VM-DirectLUNs\Win2k8-VM-dLUN2: 30GB

Host modes

vSphere server

VMware

VM2

Windows Server 2008

Fibre Channel configuration

This example uses two HP 4/64 SAN switches, with a zone created on each.

The Fibre Channel configuration is summarized in Table E-3.

Table E-3. Fibre Channel configuration summary

Component

Description

WWN

Switch 1, Zone 1

Controller 1, Port 1

5000-1FE1-0027-07F8

Controller 2, Port 1

5000-1FE1-0027-07FC

HBA 1, Port 1

5006-0B00-0063-A7B4

VM2, HBA3, Port 1

1000-0000-C97E-CA72

Switch 2, Zone 1

Controller 1, Port 1

5000-1FE1-0027-07F8

Controller 2, Port 1

5000-1FE1-0027-07FC

HBA 1, Port 1

5006-0B00-0063-A7B4

VM2, HBA3, Port 1

1000-0000-C97E-CA72

Configuring the vSphere host

After the SAN topology and array-side configuration have been completed, you can configure HBA3 to be used as a

VMDirectPath HBA for the Windows Server 2008 VM.

Note

If desired, you could configure VMDirectPath HBAs before configuring the SAN.

This appendix outlines a procedure for configuring VMDirectPath

First, complete the following prerequisites:

• Open a PuTTY (ssh client) session

to the particular vSphere host.

• Open a vSphere Client connection to the vSphere host.

This procedure assumes that you have never performed this task before. Alternate methods are available.

While not necessary, an ssh session may be useful the first time you perform this procedure.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71

Komentarze do niniejszej Instrukcji

Brak uwag

VMware vSphere 4 Podręcznik Użytkownika Strona 64

Komentarze do niniejszej Instrukcji